Home Battery Storage Installation — Southern Perth
A home battery lets you store excess solar power and use it at night or during a grid outage — cutting your electricity bill and giving you backup power when the grid goes down. But the electrical work behind it matters: battery systems connect to your switchboard and need the right isolators, protection devices, and load management to work safely and legally. Sparky Local installs home battery systems across Rockingham, Mandurah, Kwinana, Baldivis, and the wider Southern Perth corridor.
What we handle:
- Tesla Powerwall, Sungrow, Enphase & leading brand installation
- Battery-ready switchboard assessment & upgrade
- Critical load sub-panel for blackout backup power
- Solar inverter integration & battery coupling
- 3-phase & single-phase battery system installation
- Whole-home backup configuration
- Battery monitoring system setup & app configuration
- Certificate of Electrical Compliance & AS/NZS 5139 compliance
Get a Free Quote
As soon as possible
How it works
- 1
Site assessment & system design
We review your solar system, switchboard, and daily energy usage to recommend the right battery size and configuration. A battery that's too small won't cover overnight loads; one that's too large won't ever fully charge in winter. We help you get the sizing right.
- 2
Switchboard preparation
Most battery installations require switchboard modifications — adding an isolator, gateway breakers, or in some cases a switchboard upgrade to meet AS/NZS 5139 requirements. We handle this before the battery arrives on site.
- 3
Battery mounting & electrical connection
The battery unit is mounted to an exterior wall or in the garage as per the manufacturer's requirements. DC and AC cabling is run and connected to your switchboard and solar inverter. All connections are made and torqued to spec.
- 4
Commissioning, monitoring & handover
We commission the system with the manufacturer's app, configure your preferred charging schedule (e.g. solar-only charging, time-of-use optimisation, blackout backup priority), and walk you through operation. Full Certificate of Electrical Compliance issued.
Common questions
How much does home battery storage cost in Perth?
Home battery systems in Perth typically cost between $8,000 and $15,000 installed depending on battery capacity, brand, and whether a switchboard upgrade is required. A 10kWh Tesla Powerwall 3 is typically at the higher end; entry-level 5kWh systems start lower. We provide a detailed quote including all electrical work.
Do I need solar panels to install a home battery?
No — you can install a battery without solar panels and charge it from the grid during off-peak tariff periods, then discharge during peak periods to reduce bills. However, the combination of solar and battery gives the best return, and most customers install both together.
Will a home battery power my house during a blackout?
It depends on the system. Not all battery systems support blackout backup — some are grid-tied only and shut down when the grid fails (for safety). True backup-capable batteries like the Tesla Powerwall can automatically island your home during a blackout and keep your critical circuits running. We configure the backup function during commissioning.
Which battery brand should I choose?
Tesla Powerwall, Sungrow SBR, Enphase IQ, and BYD are all solid choices with good local support. The right one depends on your solar inverter compatibility, backup requirements, and budget. We're brand-agnostic and will tell you what works best for your existing system rather than pushing a margin-driven preference.
Does my switchboard need upgrading for a battery?
Usually yes — AS/NZS 5139 (the Australian standard for battery storage) requires specific protection devices and isolators that older switchboards don't have. Even newer boards often need modifications. We assess this during quoting and include any required switchboard work in your total price.
Can I add an EV charger to a home battery system?
Yes — and this is a powerful combination. A smart EV charger integrated with your battery system can charge your car from solar excess, discharge the battery to power your home at night, and in vehicle-to-home capable setups, eventually use your EV as an additional backup source. We design and install these integrated systems.
Why Sparky Local?
We handle the full battery installation end-to-end — switchboard prep, battery mounting, solar integration, commissioning, and compliance certificate. No subcontracting the electrical to an unknown sparky after your battery supplier installs the box. One team, one point of responsibility, lifetime workmanship guarantee.
Ready to get started?
Upfront pricing. No call-out fee on local jobs. Lifetime workmanship guarantee.